两种发酵工艺对黄原胶发酵的影响
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ929.2 TQ920.6

基金项目:


Effect of two fermentation processes on xanthan gum
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对添加表面活性剂TritonX-1∞与补水两种不同工艺条件对黄原胶发酵的影响进行了研究.结果表明(1)产胶初期添加∞×10"TritonX-1∞的试验组对黄原胶产胶率的促进作用最为明显,其产胶率可达3.951∥1∞mL,较对照组提高约n%,碳源转化率为71.836%.(2)保持碳源含量6.5%,当发酵进行至36h时补加20%的水分,黄原胶的产胶率可达4.962∥100mL,较对照组提高约15%,碳源转化率为76.338%.

    Abstract:

    Effect of Triton X 100 or water added on xanthan gum fermentation was with Xanthomonas campestris HL 9901 studied. It showed that: (1) 40ppm Triton X 100 added at the beginning of gum producing to the fermentation media had significant effect on the productivity, and its gum productivity reached 3.951g/100mL, exceeded the control by 11%. The carbon transformation ratio was 71.836%. However, it improved the viscosity of colloid by the addition of Triton X 100 at the initiate of fermentation is superior to the control. (2) If the carbon concentration was kept at 6.5%, the gum productivity reached 4.962g/100mL, increased by 15% when 20% water added after 36h fermentation, and the carbon transformation ratio was 76.338%.

    参考文献
    相似文献
    引证文献
引用本文

胡德亮,陈有容,李柏林,齐凤兰.两种发酵工艺对黄原胶发酵的影响[J].上海海洋大学学报,2000,(4):324-328.
HU De-liang, CHEN You-rong, LI Bai-bin, QI Lang-ban. Effect of two fermentation processes on xanthan gum[J]. Journal of Shanghai Ocean University,2000,(4):324-328.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2000-06-19
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
文章二维码